Product Description & Reviews
UT-2501 adopts optoelectronic isolation technology, it fully isolate the electric and ground wire loop circuit between both sides of RS-232 device, protects the communication device from power ground wire loop circuit and surge interference. The built-in instant voltage protector protects CANBUS interface; it adopts advanced TVS (TRANSIENT VOLTAGE SUPPRESSOR) to improve the communication reliability and stability; at the same time, UT-2501 use dual wire balance transmission instead of RS-232 port single side transmission; this greatly enlarge the communication distance. In the field of asynchronous RS-232 point to point in special line, UT-2501 meets the requirement of port protection or distance extension. UT-2501 is mini size design, there is no special requirement on wire; the consumption of external power is less than 50mA, you can plug it directly into RS-232 port, convenient for using. UT-2501 series is widely used in point to point RS-232 communication, RS-232 long distance control system, SPC exchange terminal billing, and satellite receiver. RS-232 in DB9 female,CANBUS DB9 with Binding post Distance:>1.2Km for CANBUS;5m for RS232Power Input: +5vdc
Features & Highlights
- Standards: EIA RS-232, CCITT V.24 asynchronous protocol ● Standards: EIA/TIA RS-232C、CANBUS
- Interface: RS-232 female, CANBUS DB9 male, terminal block
- Working mode: asynchronous half-duplex ● Transmission media: twisted-pair or Shielded cable
- Baudrate: 300BPS-115.2KBPS ● Dimension: 63mmX33mmX17mm ● Operating temperature: -40℃ to 85℃
- Relative humidity: 5% to 95% ● Transmission distance: more than 1,200m (CANBUS port), 5m (RS-232 port)
|Item Size:||3.7 x 2 x 2 inches|
|Package Weight:||4 pounds|
|Package Size:||3.7 x 2 x 2 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.