HiLetgo ESP32 OLED WiFi Kit ESP-32 0.96 Inch Blue OLED Display WiFi+Bluetooth CP2012 Internet Development Board for Arduino ESP8266 NodeMCU
HiLetgo ESP32 OLED WiFi Kit ESP-32 0.96 Inch Blue OLED Display WiFi+Bluetooth CP2012 Internet Development Board for Arduino ESP8266 NodeMCU by HiLetgo at Andy Pemberton. MPN: 3-01-1489. Hurry! Limited time offer. Offer valid only while supplies last. WIFI Kit series is the new development of the cost-effective networking program, the main chip using Lexin ESP32, Tensilica LX6 dual-core processor,
WIFI Kit series is the new development of the cost-effective networking program, the main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b / g / N HT40 Wi-Fi transceiver, baseband, protocol stack and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth).
This product is based on the WIFI Kit 32 added SX1278 chip, that is,for LoRa remote modem, 433MHz frequency, about -148dBm high sensitivity, +20 dBm power output, high reliability, transmission distance (measured open area communication distance 2.6Km).
Onboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display, lithium battery charging circuit and interface, CP2102 USB to serial chip, the perfect support for Arduino development environment, can be very simple and fast for program verification and product development.
Note: This item come unassembled, soldering is required, not equipped with lithium battery.
Here is the link with English documentation:
Operating voltage: 3.3V to 7V
Operating temperature range: -40 ° C to + 90 ° C
Supports Sniffer, Station, softAP and Wi-Fi Direct modes
Data rate: 150 Mbps @ 11n HT40,72 Mbps @ 11n HT20,54 Mbps @ 11g, 11 Mbps @ 11b
Transmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n
Receiver sensitivity up to - 98 dBm
UDP continues to throughput by 135 Mbps Package included:
1* ESP32 0.96" OLED WiFi Bluetooth Development Board
Features & Highlights
- 1.Note: This item come unassembled, soldering is required, not equipped with lithium battery.
- 2.Here is the link with English documentation: https://robotzero.one/heltec-wifi-kit-32/; https://github.com/Heltec-Aaron-Lee/WiFi_Kit_series
- 3.Operating voltage: 3.3V to 7V
- 4.Operating temperature range: -40 ° C to + 90 ° C
- 5.Supports Sniffer, Station, softAP and Wi-Fi Direct modes
|Item Weight:||0.04 pounds|
|Item Size:||2.28 x 0.71 x 0.71 inches|
|Package Weight:||0.04 pounds|
|Package Size:||2.28 x 0.71 x 0.71 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by HiLetgo, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
Features: 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0) 1 analog input(3.2V max input) Micro USB connection; Compatible with Arduino 1MB Flash 500mA resettable fuse A Micro USB connection Board Size:...
mpn: BBONE-BLACK-4G, ean: 4770240317331,
Use this pcb controller for DIY proyects of to controller some Antminers like the C1, S2, S4, S4+ and S7 on bitcoin mining.4GB 8-bit eMMC on-board flash storage (rev. 3). Provides lots of expansion interfaces such as Ethernet, USB host and OTG, TF ca...
mpn: F6U193312H3KK7378, ean: 0190033882480,
ESP8266 WiFi Development Board with 0.91 Inch ESP8266 OLED Display CP2012 Support Arduino IDE NodeMCU LUADescription:WIFI Kit 8 is a cost-effective Internet of things development program , the main chip using ESP8266, with CP2014 USB to serial chip, ...
Features: This TFT LCD Screen Module with a LCD break , SD card and Flash design. So it's a powerful extension module for your project. Dimension: 3.5 inch Controller: ILI9481 or ILI9488 driver(default in random) Resolution: 480x320 Data bits: ...
Tutorials and codes: This kit contains 2 detailed tutorials(PDF), one(Tutorial.pdf) for learning Arduino, another(Processing.pdf) for Interacting with Processing. You can view or download the tutorials and codes before purchasing: View online: https...
The Kuman Camera Module is a custom designed add-on for Raspberry Pi. It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface. The camera is supported in the latest version of Raspbian, Raspberry Pi's preferred ...
mpn: P3500, ean: 0789185843373,
The Adafruit Trinket M0 is a tiny microcontroller board, built around the Atmel ATSAMD21, a little chip with a lot of power. Perfect for when you don't want to give up your expensive dev-board and you aren't willing to take apart the project you wo...
mpn: 4328435149, ean: 0700381988651,
Get Your First Taste Of Raspberry Pi with this Raspberry Pi Barebones Kit from Vilros This Is the Raspberry Pi 3 Model B Baebones Kit From Vilros It includes the new Raspberry Pi 3 Model B (Latest Version Released on 02/29/2016) Raspberry Pi 3 Mod...
mpn: EL-SM-004, ean: 0746591610555,
We have the manufacture factory, making productions and selling by ourselves. So we can control the quality of our productions by ourselves for you. We’d like to receive your valuable suggestions for our products and make your idea come true. Feat...
Name: UCTRONICS Advanced Starter Kit for Arduino UNO and MEGA 2560 UCTRONICS is an open source hardware company dedicated in designing and manufacturing PC boards for the makers and industrial market, especially for the Arduino and Raspberry Pi alike...