Coolgear USB2 to 8-Port RS232-422-485 Serial TB Adapter Isolation | Surge

USB 2 to 8-port industrial serial adapter that protects you device(s) with optical Isolation, 15KV ESD protection and 600W surge protection over each port. All ports are controlled by DIP switches (8 4-pin DIP switches), each terminal block serial port can be individually designated for the signal your application demands.

Features:

• Supports USB 1.1 and USB 2.0 transfer speeds from 1.5 up to 480 Mbps, automatic link and speed detection.
• Adds eight high-speed RS-232/422/485 serial ports via USB connection.
• 2K byte receive buffer.
• 2K byte transmit buffer for high speed data throughput.
• Requires no IRQ, DMA, I/O port.
• Data rates: 300 bps to 921.6K bps.
• Each serial port supports 5-pin screw-lock-type terminal block connector.
• Auto-transmit buffer control for 2-wire RS-485 half-duplex operation.
• Biasing and Termination resistors installed on-board.
• Supports RS-232 3-wire signals: RxD, TxD, GND
• Supports RS-422, RS-485 4-wire signals: TxD-, TxD+, RxD+, RxD-
• Supports RS-485 2-wire signals: data-, data+
• Monitor LEDS of TxD, RxD indicating port status
• AC to DC-12V, 1A switching power supply included
• Supports 3KV optical Isolation, 15KV ESD protection and 600W surge protection
• Virtual COM port drivers available for Windows 10, 8.1, 8, 7, Vista, 2003, 2000
• Industrial grade metal case with DIN-rail ears for Din-rail mounting.
• Chipset: Genesys GT852G 4-port USB 2.0 hub chip + FTDI FT4232H USB 2.0 to quad UART chip
• Dimensions: 192.42 x 122.22 x 23.60 mm (L×W×H), dimensions are to DIN rail(W), to power plug(L)