BeagleBone Black Rev C (4G) Single Board Computer Development Board
Huge Savings Item! Save 15% on the BeagleBone Black Rev C (4G) Single Board Computer Development Board by Beagleboard at Andy Pemberton. MPN: BBONE-BLACK-4G. Hurry! Limited time offer. Offer valid only while supplies last. Use this pcb controller for DIY proyects of to controller some Antminers like the C1, S2, S4, S4+ and S7 on bitcoin mining.4GB 8-bit eMMC on-board flash storage (rev. 3). Provides lots of expansion interfaces such as Ethernet, USB host and OTG, TF card, serial, JTAG (no connector by default), HDMI D type, Emmc, ADC, I2C, SPI, PWM and LCD. Small size. Easy to use.
Product Description & Reviews
Use this pcb controller for DIY proyects of to controller some Antminers like the C1, S2, S4, S4+ and S7 on bitcoin mining.4GB 8-bit eMMC on-board flash storage (rev. 3). Provides lots of expansion interfaces such as Ethernet, USB host and OTG, TF card, serial, JTAG (no connector by default), HDMI D type, Emmc, ADC, I2C, SPI, PWM and LCD. Small size. Easy to use.
Features & Highlights
- 4GB 8-bit eMMC on-board flash storage (rev. 3)
- Provides lots of expansion interfaces such as Ethernet, USB host and OTG, TF card, serial, JTAG (no connector by default), HDMI D type, Emmc, ADC, I2C, SPI, PWM and LCD
- Small size
- Easy to use
|Item Weight:||0.2 pounds|
|Item Size:||2.17 x 0.12 x 0.12 inches|
|Package Weight:||0.36 pounds|
|Package Size:||4.5 x 1.6 x 1.6 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Beagleboard, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: F6U193312H3KK7378, ean: 0190033882480,
ESP8266 WiFi Development Board with 0.91 Inch ESP8266 OLED Display CP2012 Support Arduino IDE NodeMCU LUADescription:WIFI Kit 8 is a cost-effective Internet of things development program , the main chip using ESP8266, with CP2014 USB to serial chip, lithium battery interface and charge and discharge circuit, 32M Byte Flash, WIFI antenna, 0.91-inch OLED display.It can be programmed in Arduino and NodeMCU environments.Document
Features: This TFT LCD Screen Module with a LCD break , SD card and Flash design. So it's a powerful extension module for your project. Dimension: 3.5 inch Controller: ILI9481 or ILI9488 driver(default in random) Resolution: 480x320 Data bits: 8 - 16 Interface pin number: 37 pin Distance: 1 mm Note: There is a film on the LCD, if there is scratch on the film when you receive the item, pls try to remove the film with your finger nail from the corner of the LCD, thanks. Package include:
Tutorials and codes: This kit contains 2 detailed tutorials(PDF), one(Tutorial.pdf) for learning Arduino, another(Processing.pdf) for Interacting with Processing. You can view or download the tutorials and codes before purchasing: View online: https://github.com/Freenove/Freenove_Ultimate_Starter_Kit_for_Arduino Download: https://github.com/Freenove/Freenove_Ultimate_Starter_Kit_for_Arduino/archive/master.zip Contents of Tutorial.pdf: Preface Arduino Board Arduino Software First Use
The Kuman Camera Module is a custom designed add-on for Raspberry Pi. It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface. The camera is supported in the latest version of Raspbian, Raspberry Pi's preferred operating system. The board itself is tiny, at around 25mm x 20mm x 9mm. It connects to Raspberry Pi by way of a short ribbon cable. Note: Raspberry Pi is NOT INCLUDED. Feature: Angle of View: 54 x 41 degrees Field of View: 2.0 x 1.33 m at 2 m
mpn: P3500, ean: 0789185843373,
The Adafruit Trinket M0 is a tiny microcontroller board, built around the Atmel ATSAMD21, a little chip with a lot of power. Perfect for when you don't want to give up your expensive dev-board and you aren't willing to take apart the project you worked so hard to design. It's Adafruit's lowest-cost CircuitPython programmable board! It is the same form factor as the original ATtiny85-based Trinket. The Trinket M0 has swapped out the lightweight ATtiny85 for a ATSAMD21E18 powerhouse. It's just as
mpn: 4328435149, ean: 0700381988651,
Get Your First Taste Of Raspberry Pi with this Raspberry Pi Barebones Kit from Vilros This Is the Raspberry Pi 3 Model B Baebones Kit From Vilros It includes the new Raspberry Pi 3 Model B (Latest Version Released on 02/29/2016) Raspberry Pi 3 Model B Technical Specifications: SoC: Broadcom BCM2837 CPU: 4× ARM Cortex-A53, 1.2GHz GPU: Broadcom VideoCore IV RAM: 1GB LPDDR2 (900 MHz) Networking: 10/100 Ethernet, 2.4GHz 802.11n wireless Bluetooth: Bluetooth 4.1 Classic, Bluetooth Low Energy
mpn: EL-SM-004, ean: 0746591610555,
We have the manufacture factory, making productions and selling by ourselves. So we can control the quality of our productions by ourselves for you. We’d like to receive your valuable suggestions for our products and make your idea come true. Features : - Color: as shown in the pictures. - Material: durable hard PCB board and metal. - 100% brand new and high quality UNO R3 2.8 quot; TFT Touch Screen with SD Card Socket. - 2.8 inch TFT LCD shield touch screen, with SD card socket. - Ideal for
Name: UCTRONICS Advanced Starter Kit for Arduino UNO and MEGA 2560 UCTRONICS is an open source hardware company dedicated in designing and manufacturing PC boards for the makers and industrial market, especially for the Arduino and Raspberry Pi alike open source ecosystem. Package including: 1pcs Project Box 1pcs UNO R3 1pcs UNO R3 Proto Shield V3 1pcs 830 Tie Point Breadboard 1pcs 65 Male to Male Jumper Wire 20pcs 15cm Male to Female DuPont Wire 1pcs USB Cable 1pcs 9V Battery Clip 20pcs 220
By seeed studio
mpn: 2720, ean: 0720405537450,
Description:DescriptionSeeedStudio BeagleBone Green Wireless is a joint effort by BeagleBoard.org and Seeed Studio. Based on the open-source hardware design of BeagleBone Black, the newest BBGW has added two Grove connectors, making it easier to connect to the large family of Grove sensors. It is the first Wi-Fi + Bluetooth Low Energy (BLE) board from BeagleBone community.Feature:KeyThe first Wi-Fi + Bluetooth Low Energy (BLE) board from BeagleBone communityBuilt-in 2.4 GHz TI WLinkTM8 Module
Attention: Support all all revisions of the Raspberry Pi Features: Raspberry Pi Camera Module, adjustable-focus Raspberry PI infrared night vision camera 500W+ photographic lamp light Raspberry Pi Night Vision Camera, supports all revisions of the Pi 5 megapixel OV5647 sensor Camera specifications: Lens: 1/4 5M Aperture (F): 2.9 Focal Length: 3.29MM Diagonal: 72.4 degree Sensor best resolution: 1080p (2592×1944 pixels) Dimension: 25mm x 24mm x 6mm 4 screw holes Used for both attachment and